You should be familiar with commercial displays, but you are a bit unfamiliar with industrial displays. In fact, the main difference between industrial and commercial displays is stability and noise immunity, image clarity, color reproduction, device ports, I / O interfaces, heat dissipation architecture, etc. Then how to judge the quality of industrial displays? ? In fact, there are many metrics to measure the quality of an industrial display. Due to the specifics of the application, we usually take into account photovoltaic performance, protection level, service life, etc. As for some other tough indicators, we will analyze them in subsequent articles due to limited space, hoping to help everyone.
Today, we analyze how to select a high quality industrial display based on several key factors such as contrast, color saturation, brightness, viewing angle, protection level and service life.
Industrial-grade monitors can be used in darker work environments, and the higher the contrast ratio, the better they work. Displays with basic sizes such as 10.4" are very common in various industrial environments, and we generally recommend that customers choose displays with a contrast ratio of 450:1. Many customers with high contrast requirements will choose this display.
Secondly, color saturation.
In the industrial use of monitors, color saturation is a very important factor to consider. To meet the needs, many people choose monitors with full color saturation.
Generally speaking, the brightness of industrial displays is almost twice that of office displays, and at least 200 cd/m2 can meet the needs of industrial environments.
The production process is not like sitting in front of a computer and looking at a screen. It requires the monitor to have a wide viewing angle. The wider the viewing angle, the better it handles complex work environments. .
5. Protection level.
Industrial grade monitors must have waterproof and dustproof features to ensure stable performance. Currently, the main industrial monitors on the market can have IP65 protection on the front. The IP65 protection standard is to prevent dust and foreign objects from entering, and can prevent immersion in low pressure water for 3 minutes. Jiaweishi industrial displays are also produced according to this standard.
6. Service life
Industrial displays will not be replaced as often as consumer displays, and life requirements of 3 to 5 years or even 10 years are normal. Here's what to look out for. The service life of an industrial display is determined by many factors.ramie. Production standards, quality of materials and strict quality control of major brands such as Jiaweishi ensure the use of the product. much higher than that of small workshops, and also safer in terms of after-sales service and product quality assurance.